Adm Graf Spee Superstructure 1.0

Admiral Graf Spee Superstructure

  1. darkapollo
    Includes the STL's and STEP
    The range finders might need to be modified for easier printing by replacing the arms with 3/16" tube or rod.
    Tower is located with 1/4" square rod or tube.
    Aircraft catapult is not fixed so it can be placed as the builder sees fit.
    Secondary guns will use 1/8" rod for barrels and have a 5mm location pin hole in the bottom.

    As this superstructure is small and oddly shaped with flying deck, it will need supports in some areas. The tower is sectioned, as is the funnel (funnel is pinned in and the tubes can be filled with foam to be used as a float)
    upload_2021-8-9_10-55-19.png
    Xanthar likes this.