Use standard print setting for these parts. You may need to use support if you want the bottom of the boats to look nice.
The 27' Whaler is modeled after the US WWII boat
The 36' boat is from my Potemkin model, so it works well for WWI ships. Print one at 65% and it will nest within the full size version
The steam launch is from the early 1900's. Clean up the hole for the smoke stack with a 1/8” drill and glue in a 1/8” tube for the stack.
Some basic lifeboats 1.3
3 different lifeboats, from 36' to 27' with a 1900's era steam launch
Recent Updates
- New 40' Motor Boat and 16' whaler Dec 28, 2015
- New whalers Mar 28, 2015
