Brought to you by the collaboration of TyngTech© and Smith Industries™, this easily printed part will convert a common windshield washer pump into a small, lightweight pump suitable for destroyers.
What you will need to build this pump:
- This pump available at most auto parts stores, or RockAuto.com
- The pump housing printed by you or a friend.
Assembly is very simple. Just push the printed pump housing all the way onto the rubber grommet of the pump, push the hose onto the discharge pipe, and install the restrictor and you're done. Simple!
- Short length of hose and a 1/5 unit restrictor
Pump height: Fluted - 2.21 in
Flat - 2.10
Pump Weight (without wires or hoses) Fluted - 2.45oz / 69g
Flat - 2.40oz / 68g
Flow capacity: 0.66gpm @ 11.45v
0.5gpm @ 7.6v
This pump comes with two versions dependant on your needs. The one has flutes on the bottom so the pump can be mounted on a flat surface and still pump, the other is flat.
Printing recommendations:
I printed mine with 0.12mm layers, 3 outer perimeters, and 30% infill.
Windshield Washer Pump 2016-10-17
Simple one-piece part to convert a washer pump into a compact 1/2 unit pump.
