3D Printed Parts and Glue

Discussion in 'Digital Design and Fabrication' started by Radioman, Feb 15, 2016.

  1. Radioman

    Radioman Active Member

    Joined:
    Feb 4, 2015
    Posts:
    187
    Location:
    Franklin Wisconsin
    What type of glue do use on printed parts? Plastic model glue or epoxy.
     
    Radioman, Feb 15, 2016
    #1
  2. rcengr

    rcengr Vendor

    Joined:
    Feb 13, 2010
    Posts:
    1,295
    Location:
    Ohio
    I get ABS pipe glue from the plumbing section at the hardware store. Acetone and CA glue also work.
     
    rcengr, Feb 15, 2016
    #2
  3. NickMyers

    NickMyers Admin RCWC Staff

    Joined:
    Nov 15, 2007
    Posts:
    4,409
    Location:
    Federal Way, WA
    Abs i bond to other abs with acetone.
    Pla can be heat bonded to itself.
    To bond to other things ive been using epoxy or e6000 depending on the location.
     
    NickMyers, Feb 15, 2016
    #3
  4. ish311

    ish311 Active Member

    Joined:
    Aug 18, 2014
    Posts:
    527
    Location:
    North Central Florida
    model glue also works really well on pla as most models are a mix of pla and abs
     
    ish311, Feb 15, 2016
    #4
  5. Tugboat

    Tugboat Facilitator RCWC Staff Admiral (Supporter)

    Joined:
    Jan 10, 2007
    Posts:
    8,298
    Location:
    Statesboro, GA
    What are you making from PLA for warship use?
     
    Tugboat, Feb 17, 2016
    #5