Dunkin Dunkerque Build

Discussion in 'Warship Builds' started by nativecaptain, Sep 4, 2013.

  1. nativecaptain

    nativecaptain Member

    Joined:
    Sep 5, 2010
    Posts:
    93
    Hello everyone.:D
    This is my second build, and im going to be building the french ship Dunkerque. I'm going to be using the plans posted by Tugboat. Before i start i just wanted to make sure that the spacing is ok ircwcc. 85% penetrable rule.

    P.s if anyone has anytips about building this ship pls share.:cool:
     
    nativecaptain, Sep 4, 2013
    #1
    Kevin Jarvis likes this.
  2. absolutek

    absolutek -->> C T D <<--

    Joined:
    Sep 6, 2009
    Posts:
    1,807
    Location:
    Ontario, Canada
    The spacing is fine and they are all over 1" apart if I remember correctly. The 85% penetrable rule depends on what thickness ribs you use (i used a mix of 3/8" & 1/4" ribs). Speaking of which, I guess I should go finish my Dunkirk.
     
    absolutek, Sep 4, 2013
    #2