1/144 Mehoshi Maru 2014-11-30

Simple Oiler. Roughly 3 ft in length

  1. NickMyers
    maru-sailing.jpg
    These plans were drawn up in Solidworks, cribbed from a planview provided by Carl Bitondo (Kotori87) of the same ship.

    The plans are a bit rough, they were originally intended for my own use, and I left some things unfinished. Notably there are some curves in the subdeck that need to be sanded in, and I would reduce the skeg by about a half inch to provide more room for the prop and rudder.

    Length: 35.0 inches
    Beam : 4.50 inches
    Draft : 2.00 inches

    Page dimensions for the PDFs within are as follows:

    Data Sheet - Legal (8.5x14)
    CapRail - Bow - Legal (8.5x14)
    CapRail - Midsection - Custom 22x8.5
    CapRail - Stern - Legal (8.5x14)
    Keel - Bow - Legal (8.5x14)
    Keel - Midsection - Custom 22x8.5
    Keel - Stern - Legal (8.5x14)
    Ribs - Legal (8.5x14) (3 pages)

    bottom_up.png isometric_062.png random.png starboard.png trimetric.png
    Mark41 likes this.