These plans were drawn up in Solidworks, cribbed from a planview provided by Carl Bitondo (Kotori87) of the same ship.
The plans are a bit rough, they were originally intended for my own use, and I left some things unfinished. Notably there are some curves in the subdeck that need to be sanded in, and I would reduce the skeg by about a half inch to provide more room for the prop and rudder.
Length: 35.0 inches
Beam : 4.50 inches
Draft : 2.00 inches
Page dimensions for the PDFs within are as follows:
Data Sheet - Legal (8.5x14)
CapRail - Bow - Legal (8.5x14)
CapRail - Midsection - Custom 22x8.5
CapRail - Stern - Legal (8.5x14)
Keel - Bow - Legal (8.5x14)
Keel - Midsection - Custom 22x8.5
Keel - Stern - Legal (8.5x14)
Ribs - Legal (8.5x14) (3 pages)
1/144 Mehoshi Maru 2014-11-30
Simple Oiler. Roughly 3 ft in length
-
Mark41 likes this.
