1/144 USS Texas 1.0

Plans to build the USS Texas or New York hull

  1. rcengr
    Plans to build the USS Texas.
    texas w deck.jpg

    3DP file for the turret is here: https://rcwarshipcombat.com/resources/texas-turret.118/

    Plans to help with the superstructure: https://rcwarshipcombat.com/resources/uss-texas.81/


    *.pdf files are the parts laid out for laser cutting. These are on 12” x 20” (300mm x 500mm) sheets and have the part outlines offset by 0.004” (0.1mm) to compensate for the laser kerf. Lines in black are cut through while lines in magenta are text to be etched only. The best material for these parts is Baltic Birch plywood. Two sizes of Baltic birch are used: 1/4” thick (which is really slightly oversized 6mm) and 1/8” (actually 3mm). Baltic Birch also uses a non-waterproof glue which is safer and easier to laser cut. Note that if you use plywood with true 1/4” or 1/8” dimensions that the notches will probably be too tight to put together. You would need to manually open up the notches or sand down the thickness of the parts.

    *.pdf files are also the best files to use if you are cutting out parts by hand.

    *.dwg files are the original parts (no offset) that can pulled into your CAD program to be manipulated or changed. Use these files if you want to create 3D printer extrusions of the parts or input them into a CAM program to cut out with a router.


    You can send these files to a commercial laser cutter to be cut out. You can also sell the parts for profit.

    These files are licensed under Creative Commons version 4.0:

    by-sa.png CC BY-SA: This license allows reusers to distribute, remix, adapt, and build upon the material in any medium or format, so long as attribution is given to the creator. The license allows for commercial use. If you remix, adapt, or build upon the material, you must license the modified material under identical terms.