I have an Ender 3 printer with an encloser. I tried printing a small test cube today and I have zero bed adhesion. I increased all of the...
My Big Gun Richelieu is 20 years old. I traced the Goff plans back then to make SS pieces. This summer, I used the original patterns to make a...
It's available in: https://rcwarshipcombat.com/resources/sms-moltke-superstructure.161/ Enjoy! (Not sure why I'm posting a separate thread here,...
Howdy, y'all, It's not quite Christmas yet, but Bob Pottle did mention something about a Rodney, so I thought I'd toss this out there to share....
Posting just the first couple of sections of the USS New York ACR-2 (cruiser) Hull 1.stl you'll need to add supports for the best print Hull...
I've been away from the forums for quite some time - but I've still been designing boats in fusion 360 and printing away... We'll today I was...
Just a quick and dirty little test cube to test your favorite filaments with under fire. Free use for all, I'm not picky. :)
What's one more build thread when I have 2 started and unfinished build threads already?? I've been a little under the weather recently which has...
So, I figured I'd start this thread because the build effort will be running parallel with my Courbet. I've always liked HMS Erin as a beamy...
Well I have been following this hobby for years and I have finally pulled the trigger on a ship build. I'm in Virginia and met with mark from MABG...
The furlough looks to be in full swing with no let-up, hope it doesn't last too long because I like work, but this is a golden opportunity to get...
TL;DR I put together a Shapeways “store” to make Cast Bronze Kort style propellers and 3D printed rudders available to the hobby....
Hello! I have had an idea of making an entire ship 3D printed, each section with its part of the superstructure, and then fit together like...
I recently learned some very helpful tips that I thought I would share since they made such an impact for me. 1. Make your design with your...
3D printed scale ship models at reasonable prices :https://www.shapeways.com/shops/distefano_3dprint
