This Shore Battery thread made me think that Fort Drum would be fun to make. Here's my progress so far : [ATTACH]
I've already posted a pic of the main mast in the "Cage mast" thread. Here's the beginnings of the Super Structure. BB-49-FDW-SS1 by Xanthar...
I've been away from the forums for quite some time - but I've still been designing boats in fusion 360 and printing away... We'll today I was...
Just completed this design for a friend. I haven't seen any 1.5 unit printable cannons before, so I took my LPC design and added two more rings of...
This is a template for drawing portholes on your superstructure/hull/etc. It is a 15cm ruler with a 3.5mm hole spaced every 10cm. Get a sharpie or...
see thread here https://rcwarshipcombat.com/threads/3d-printed-cannons-1u-twins-0-5u-twins-1u-single.446264/
After many rounds of trial and error, I have improved the performance of my 3d-printed cannons. By increasing the radius of the internal coil, the...
[ATTACH] This is a 1.5in diameter Kort-ish style propeller designed from the ground up to be 3d printed. Learning from different propellers I've...
Included are three types of turrets - director, regular, and dummy turrets. The dummy turrets just have slight recesses into the face of the...
Introducing a 3D printable fastgun piston. Available in three convenient sizes: 1/2, 5/8, and 3/4 inches tall. They have a 3/8" wide base and the...
I'm wondering if anyone else has tried printing and fitting out the Liberty Ship that John Buttery put up on Thingiverse?...
And now for something completely useless. A 144 scale tugboat that is only 8.33" long. It can be printed on a 8"x8" printer at a 45 degree angle...
