Cannon desgin for 1/72 ships

Discussion in 'Queen's Own 1/72' started by Cody Moore, Jan 13, 2023.

  1. Cody Moore

    Cody Moore Member

    Joined:
    May 27, 2019
    Posts:
    13
    Location:
    Nebraska
    Hey Guys,

    Looking for help with building cannons for a 1/72 French Volta. Any advice is appreciated!
     
  2. Seventy Two

    Seventy Two Member

    Joined:
    Jun 15, 2022
    Posts:
    27
    Location:
    Auburn, WA
    Well now that's coincidence.
    I've relocated most of my shop from the cold garage to the warm house.
    And the first ship to work on is a 1/72nd Mogador class destroyer.
    Capture.JPG Capture2.JPG

    When the club was active we had 2-3 people in the club that owned lathes and made most of the guns.
    Since the club hasn't been active for 5-6 years now we have only gun maker left...maybe.
    The machining is required for the loader/breach/piston and magazine assembly.
    So, there is probably little chance of getting guns made now.
    I'm assuming of course that you want to arm it like our club arms them.
    If not then I think Battlers Connection is about your only choice for cannons.

    Capture4.JPG Capture5.JPG
    Loader/breach/piston sitting on Magazine and loader
    square clippard part.

    I'd probably be willing to loan you the guns or parts if you wanted to try to get them machined/made yourself.
    I think I also have a pretty good how to make guns manual I could send you.

    Just curious how you came to choose a 1/72nd Volta.
    How far along is she? Ship built? Powered and manuverable?
    Thanks. Send a pic or two.
     
    TorpCruiser, Cody Moore and Xanthar like this.
  3. Cody Moore

    Cody Moore Member

    Joined:
    May 27, 2019
    Posts:
    13
    Location:
    Nebraska
    Those are beautiful ships!

    I acquired a Volta that was nearly complete but had been used as a torpedo test target. Just finished the repairs to the hull but would like to get it operational. Also have a rather large Graf Spee that I am re skinning.
     

    Attached Files:

    Xanthar likes this.
  4. Xanthar

    Xanthar Well-Known Member

    Joined:
    Sep 13, 2015
    Posts:
    656
    Location:
    Upstate NY
    Do you have any pics of the part that needs to be turned?
    I've got a lathe that needs a project!

    PS. I love that the whole assembly is on a rail for ease of maintenance.
     
  5. Cody Moore

    Cody Moore Member

    Joined:
    May 27, 2019
    Posts:
    13
    Location:
    Nebraska
    I would be happy to buy parts and cannons from you!
     
    Last edited: Jan 16, 2023
  6. Cody Moore

    Cody Moore Member

    Joined:
    May 27, 2019
    Posts:
    13
    Location:
    Nebraska

    I forgot to say she is motored and almost ready for a sea trial. I need to still make a rudder, and get the battery and Radio installed.
     
  7. Z Boat

    Z Boat Well-Known Member

    Joined:
    Jun 17, 2015
    Posts:
    250
    Location:
    Roseville California
    If you are trying to start a 1/72 group near you, I would start with fixed gun DD's', you can use fast guns to get started. The B-110 and Clemson are to good starter boats and can beat the Volta. The Fletcher will be a good third boat that will be easy to arm. The attached are the easy to make rotating guns from my 1/72 ZH1. Now in my 1/144 Mogami.
    IMG_1362.jpg IMG_1411.jpg
     
  8. Cody Moore

    Cody Moore Member

    Joined:
    May 27, 2019
    Posts:
    13
    Location:
    Nebraska
    Thank you!
    Trying to get a 1/72 club here in Nebraska. Miss playing against you and Gary up in California!