co2 regulators for small cartridges

I would be interested in at least 3 or 4 depending on price.

 

I'd be interested in one.

 

Nah plenty of people getting rid of RTB because of the seal issues (easy to fix). But a Battlers option would be sweet! I would probably be lighter than RTB!

 

So excited you'll be floatin' on air. LOL

 

Charley, take a look at item 50040 on this page:

http://www.lelandltd.com/regulating_valves_prd.htm

 

Like this?

 

Steve,

Thanks for the idea! I worked with palmer to design the 1/2-20 to ASA adapter about 20 years ago when the 56g cartridges was a big item
https://palmerspursuit.com/products/1-2x20-to-825x14-adapter?variant=12133146567

 

OK is everyone cool with the 1/8" NPT reg. or do we want it to be a direct pierce?

 

If you go that route you could drop the built in ASA and offer the NPT version with the ASA or piercing adapters as a package.

This the ASA adapter I'm using on my Holly nitrous reg conversion. Very lightweight.

 

I used that same adapter when I had the old brass Western reg.

 

Pardon my ignorance, does the capsule need a thread or not?

 

The regulator body will have an 1/8" NPT for the supply side.
This would allow to make many type adapters from ASA to 3/8-24 and 1/2-20 piercing adapters maybe a "Y" splitter for 2 piercing adapters, etc....

 

Sign me up!